AQL sampling plan for final random inspection (fri): what importers book before shipment: part 4
What you book before shipment is not a day of checking but a sampling plan: which goods form the lot, which inspection level applies, which defect counts are acceptable, and which extra screens travel with the visit. Buyers who write these four inputs into the booking get verdicts they can defend in front of a factory and a marketplace. Buyers who book only a date get a report whose numbers were chosen by someone else. The difference is one paragraph of booking language.
Key takeawaysThe booking is a sampling plan: lot size, inspection level, AQL numbers per defect class, plus any extra screens. · Levels and AQL values change the sample size and the acceptance numbers, so agree them in writing before the visit. · Restricted-substance rules limit hazardous materials in regulated electrical and electronic goods, which is why document and marking screens belong in the plan[1]. · The CE marking signals conformity with applicable European requirements, so label and declaration checks deserve their own line in the booking[2]. · A plan confirmed by both sides turns verdict disputes into document comparisons instead of arguments.
Importers often book inspection the way they book freight: a date, a quantity, and a signature. Then the visit happens, the report arrives, and the verdict rests on numbers nobody discussed beforehand — an inspection level chosen by default, defect thresholds nobody set, and a sample size that simply appeared in the report. When the factory disputes the verdict, the buyer discovers there is nothing in writing to point at.
The sampling plan is the part of the booking that prevents this. It names the lot, the inspection level, the acceptable quality limits per defect class, and any additional checks such as label or substance screening. Published substance rules restrict hazardous materials in electrical and electronic equipment placed on regulated markets[1], and buyers who sell into those markets increasingly fold a document and marking screen into the same visit rather than treating it as a separate exercise.
This fourth part of the sampling-plan series walks through what each booking input means, how levels and AQL numbers change the visit, where marking and substance checks fit, and how to lock the plan in five moves. It assumes no statistics background and ends with the booking language that keeps the verdict defensible.
The plan decides the verdict before anyone opens a carton
Every sampling verdict answers one question: given the defects found in the sample, should the lot ship. The answer depends on three booked inputs, not on the inspector mood. The lot size fixes the sample-size code letter, the inspection level scales scrutiny up or down, and the AQL numbers set the allowed defects per class. Change any one of them and the same goods can pass or fail, which is exactly why defaults are dangerous.
The practical consequence is that the booking email carries more weight than the visit itself. A buyer who writes general inspection level II with major 2.5 and minor 4.0 has defined the arithmetic; a buyer who writes full inspection has defined nothing and will accept whatever the provider assumed. In practice, what the buyer books is a pre-shipment inspection carried out on finished and packed goods, with the sampling arithmetic written into the confirmation so both sides can check the verdict afterwards.
Levels, AQL values, and what they actually change
| Booking choice | Typical setting | What it changes | Guidance for importers |
|---|---|---|---|
| General level II | Default for most consumer goods | Baseline sample size for the lot size | Start here unless a reason points elsewhere |
| General level I or S-levels | Low-risk goods or tight budgets | Smaller sample, weaker discrimination | Use only when defect cost is genuinely low |
| General level III | High-value or regulated goods | Larger sample, sharper verdict | Use for first orders from a new factory |
| Critical defects at zero tolerance | Safety and regulated goods | Any critical finding fails the lot | Always separate critical from major in writing |
| Extra screens for markings | Regulated destination markets | Label and document verification time | Book the extra half-day rather than squeezing it in |
Where substance and marking screens fit in the visit
A sampling visit can carry regulatory screens without becoming a laboratory audit. The inspector verifies that ratings plates, warnings, and conformity markings match the approved artwork, that model numbers on the goods match the declarations, and that the packaging carries the required importer information. The CE marking indicates conformity with the applicable European requirements for the product[2], so checking its presence, proportions, and accompanying documentation is legitimate visit work that takes minutes per sample.
Substance screening works the same way at the document layer. The inspector confirms supplier declarations exist for the finished product, checks that homogeneous-material claims match the actual construction, and pulls sealed samples for laboratory analysis where the booking requires it. Restricted-substance rules place limits on hazardous materials in electrical and electronic equipment[1], and the visit establishes the chain from tested sample back to shipped lot. Screening plus sampling on site, verdict from the lab: that division of labor keeps the booking honest about what each step proves.
Book the plan in five moves
- Declare the lot in detailList every SKU with order quantity, carton count, and the defect classes that apply to it. The provider cannot size the sample from a purchase-order total alone, because mixed lots need per-group arithmetic.
- Name the level and the numbersWrite the inspection level and the three AQL numbers into the booking request, and ask the provider to confirm the resulting sample size in the reply. Confirmation in both directions removes the most common dispute.
- Add the extra screens explicitlyAdd marking, document, and sample-pulling instructions as separate booking lines with their own time allowance. Screens squeezed into leftover time get skipped when the visit runs long.
- Share the plan with the factorySend the factory the same plan the inspector will apply, including the acceptance numbers. A factory that has seen the arithmetic stages the goods correctly and argues less.
- File the confirmed planKeep the confirmed booking with the purchase order so the verdict can be checked against the agreed numbers months later during a claim or audit.
Defaults are choices made by someone else
Every blank line in a booking gets filled by assumption: the provider default level, the factory preferred defect definitions, the leftover time slot for extra screens. Each assumption favors the party that made it, and the buyer discovers the shape of those assumptions only when a verdict hurts. Writing the plan explicitly costs fifteen minutes and returns control of the arithmetic to the party paying for the goods.
Review the last three bookings your team placed and check how many named the level and AQL numbers. If the answer is none, the sampling series this article belongs to gives you the progression: timing, briefing, planning, and reading the report. Start the next booking with the five moves above, and the visit that follows will produce a verdict with a paper trail instead of a surprise.
Sources
- Wikipedia: Restriction of Hazardous Substances Directive —— Overview of the RoHS directive restricting hazardous substances in electrical and electronic equipment.
- Wikipedia: CE marking —— Overview of CE marking as conformity marking for products sold in the European Economic Area.
Frequently asked questions
Who decides the sample size for my shipment?
The sampling standard you agree in the booking, applied to your lot size and inspection level. The provider reads the tables; you choose the level and the AQL values. That is why the booking confirmation should name the level and the three defect-class numbers explicitly instead of saying inspection in general terms.
Can different SKUs in one order use different AQL levels?
Yes, and many buyers do. Electronics housings might run a tighter major AQL than simple textile accessories from the same supplier. Write the per-SKU levels into the booking so the inspector applies the right numbers to each group instead of averaging everything into one verdict.
What happens if the finished quantity changes before the visit?
Tell the provider immediately, because the sample size follows the presented lot, not the purchase order. If half the cartons are missing, the inspector either draws a smaller sample with a weaker verdict or records the visit as not executable. Moving the date beats paying for a verdict that covers goods nobody saw.
Does the visit itself prove RoHS compliance?
Only partially. The visit can verify markings, declarations, and label consistency against the order, and it can pull sealed samples for laboratory testing. Full substance analysis needs lab equipment, so treat the site visit as screening plus sampling, and the laboratory report as the substance verdict.
Get the weekly brief.
One long-read, every Friday. The dashboards other analysts won't show you, the post-mortems the vendors hope you skip.